|
The
automatic transfer line on manufacture of the laminated parquet
This industrial line is intended for manufacture of the laminated parquet in a
full cycle from opening laminated plates before packing ready parquet blocks.
Productivity - 4000
m2 for 8 hours
The cutting tool - Mills of company " Leitz "
Floor space - 1500 m2
Recommended floor space - 2500 m2
STANDARD EQUIPMENT
LINES ON MANUFACTURE OF THE LAMINATED PARQUET:
LM
The automatic submitting device
LM Y
The machine tool of longitudinal - milling
processing
LM T1
The
automatic conveyor
LM B 150
The automatic face-milling
machine tool
CHARACTERISTICS
LM
AUTOMATIC FEEDER
Automatic feeder has pistons and rubber wheel. The piston is
adjusted according to the length of the good. The electronic rotation is
adjustable to rubber wheel.
|
Technical Specifications LM |
|
Min. Max. Working Length |
250 - 1500 mm. |
|
Min. Working Width |
30 - 250 mm. |
|
Feed Speed |
10 – 40 m/min. |
|
Total Motor Power |
0, 37 Kw. |
|
Working Pressure |
6 bar |
LM / Y
MACHINE FOR LENGHT GROOVE AND TONGUE CUTTING
(Single and Double Track Belt Longitudinal T&G Machine)
LM /
Y provides the tongue and groove parts of the goods by the length cutting
system. Spindle configurations are settled by 4+4. There are electronic
adjusted indicators.
There are side and upper presses on the entry of the side machine .The
compact presses, which are not leaving intervals, ensured that the goods
enter to the machine without making any deviations.
|
Technical Specifications |
LM/Y 70 |
LM/Y 150 |
|
Min. Max. Working Length |
250 - 1500 mm. |
250 - 1500 mm. |
|
Min.Max. Working Width |
70 -
150 mm. |
150 -
250 mm. |
|
Feed Speed |
8 –
30 m/min. |
8 –
30 m/min. |
|
Spindle Speed |
6,000 r.p.m |
6,000 r.p.m |
|
Cutter Adjusting Measurements |
Electronic |
Electronic |
|
Chain System |
Linear
Re-Circulating Ball Bearing and Guide way |
Linear
Re-Circulating Ball Bearing and Guide way |
|
Number of Chain
Tracks Links |
Unique |
Double |
|
Upper Pressuring System |
Turning Belt
Together with Chain |
Turning Belt
Together with Chain |
|
Feed Motor Power |
3 Kw. |
3 Kw. |
|
Number of Spindles |
3+3 or 4+4 |
3+3 or 4+4 |
|
Total Motor Unit |
9 or 11 |
13 or 15 |
|
Working Pressure |
6 bar |
6 bar |
|
Total amount of
exhaust air |
10,000 m³ /hour |
10,000 m³ /hour |
|
Total Motor Power |
27 - 35 Kw. |
29 - 37 Kw. |
LM T 1
TRANSFER BELT MACHINE
The
goods are transferred from LM / Y to LM / B 150 by the transport belt.
|
Technical Specifications LM
T 1 |
|
Feed Speed
|
30 - 70 m/min. |
|
Total Motor Power |
0,75 Kw. |
LM / B 150
MACHINE FOR CROSS GROOVE AND TONGUE CUTTING
This
machine tool is intended for drawing a crest and grooves on a face part of
preparation.
It is equipped with the
device of automatic loading with the store, photo cells and pneumocylinders.
The
automatic
face-milling machine tool last in an industrial line.
The bed is made of chromeplated steel which does not give in to erosion and
allows to increase speed of rotation of spindles easily. This system also is
supplied with electronic system of indication.
|
Technical Specifications
LM / B
150 |
|
Min. Max. Working Length |
250 - 1500 mm. |
|
Min.Max.
Working Width |
40
- 400 mm. |
|
Feed Speed |
10
– 80 pcs./min. |
|
Spindle Speed |
6,000 r.p.m |
|
Cutter Adjusting
Measurements |
Electronic |
|
Chain System |
Linear
Re-Circulating Ball Bearing and Guide way |
|
Number of
Chain Tracks Links |
Double |
|
Upper Pressuring System |
Turning Belt
Together with Chain |
|
Feed Motor Power |
2,2
Kw. |
|
Number of Spindles |
3+3 or 4+4 |
|
Total Motor Unit |
13
or 15 |
|
Working Pressure |
6 bar |
|
Total Amount
of Exhaust Air |
10,000 m³ /hour |
|
Total Motor Power |
29
- 37 Kw. |
|
