|
The equipment
of our company is established in shops on manufacture edging
wood
product by productivity from 50 m3 in change (on raw material). Thus the
factor of a useful output can reach
75 %. (at use saws machine tools). Distinctive
features of all modelling lines is simplicity and convenience in management, an
optimum parity of the price and quality, high
efficiency and quality of work.
Example of a set of machine tools for typical process of sawing up of a board:
 LOG
EDGING SAW
HPM -500
The
machine tool of the first lines, through passage type, saws logs in diameter up
to 500 mm. The cutting tool – disk saws. Speed has drunk from 0 up to 40 m /
mines smoothly is adjusted by a hydrodrive.
MULTIPLE RIP SAWS
HCD 2M-250
The
machine tool of the second lines, saws two, a bar on a board. The cutting tool -
disk saws in diameter of 400 mm (2 lines). Speed has drunk up to 40 m / mines
smoothly is adjusted by a hydrodrive. Due to a powerful drive (2х75) and systems
of support the width has drunk kw up to 600 mm and height of preparation up to
250 mm. And due to advanced systems of submission straightforwardness of a board
is reached
(achieved).
RESAW FOR SLABS HYM-400
The machine tool is established in
a line on sawing up wood
product . The cutting tool – disk saws in horizontal position. Speed as is
smoothly adjusted within the limits of 40 m / mines by a hydrodrive. The new
system of submission excludes a stop of preparation at any thickness and
curvature of an initial material.
PARALLEL BOARD EDGER HY
2G-120
The machine tool
cuts edges of a board and, at will, makes
her (it) has drunk on two parts the third saw.
Position of saws varies on a command from a control
panel and is supervised by digital system. Speed of submission is adjusted up to
40 m / mines by hydrosystem. Thickness of preparation – up to 120 mm. For
increase of efficiency on the machine tool it is possible to establish laser
rulers – indexes of a line has drunk.
|
